Configure Printing To A Print Server

Configure printing directly to a print server instead of printing through a file server:

1.             Select Start

2.             Select Settings

3.             Select Printers

4.             Select Add Printer

5.             Select Next for Welcome to the Add Printer Wizard

6.             Select Local Printer

7.             Do not check Automatically detect and install my plug and play printer

8.             Select Next

9.             Select Create new port option

10.          Select Standard TCP/IP port for type

11.          Select Next

12.          Select Next for Welcome to the Add Standard TCP/IP Printer Port Wizard

13.          Enter printer IP address (print test page from JetDirect box to get IP address, example:

14.          Port name will display below. If a 3 port print server is used, add a letter A thru C after the port name.

15.          Select Next

16.          Enter Device port (Parallel 1for single ports, Parallel 1, 2 or 3 for 3 port)

17.          Select Next

18.          Select Finish for Completing the Add Standard TCP/IP Printer Port Wizard

19.          Chose manufacturer and printer model

20.          Select Next

21.          Select printer name and printer default option

22.          Select Next

23.          Select Do not share the printer

24.          Select Next for Printer Sharing

25.          Select Next to print test page

26.          Select Finish


Print Friendly, PDF & Email